PDA

View Full Version : Whiteline Roll Center Adjustment Kit at WORKS



Jamie@WORKS
01-02-2007, 01:23 PM
The same race-proven ideas that helped in a successful 2006 season for the GoodSport/K&N/WORKS USTCC EVO and the WORKS Time Attack EVO is now available for your own street/track driven EVO.Â* The Whiteline kit alters the front-end geometry (although not as extreme as the custom-fabricated units used on our race cars) to create a more favorable output while cornering.Â* Kits are in stock and available for installÂ* for only $449.Â* (Price includes parts, tax, labor and front toe adjustment.)Â*

http://www.worksevo.com/store/product_info.php?cPath=26&products_id=408

This job also presents the perfect opportunity to add the WORKS USB (Urethane Suspension Bushings) for the front control arm and/or front sway bar.Â* Available for only $99 and $49, respectively, when combined with the above kit.Â* (Price includes parts, tax and labor.)

http://www.worksevo.com/store/product_info.php?cPath=26&products_id=69

Give us a call at the shop to setup an appointment--be sure to mention your NorCalEvo discount :) Specials valid through January 2007. Prices subject to change.

Jamie@WORKS
01-03-2007, 09:50 AM
WORKS Urethane Suspension Bushing info added :)

More USB info here: http://www.norcalevo.net/forum/index.php?topic=15156.msg205292

vtluu
01-03-2007, 10:02 AM
For those of us who like to DIY, how easy is it to install? (Not including the alignment of course.)

Jamie@WORKS
01-03-2007, 10:18 AM
For those of us who like to DIY, how easy is it to install? (Not including the alignment of course.)


Difficulty isn't that high, just takes some time.Â* The most difficult aspect is physically pressing the old parts out.Â* Again, this requires a little bit of patience and just the right size adapter(s) for the press... oh, and the press itself ;)Â* The new parts are usually easier to press in provided the alignment of everything is correct.Â* You can also check out Whiteline's version of the instructions: http://www.whiteline.com.au/docs/instructs/Z351_KCA395.pdf