View Full Version : new hardware
I've finally finished putting in the hks cams, now if the cam gears arrive on time, I can finish the job this weekend.
hks cams
http://www.norcalevo.net/gallery/albums/album16/Dscn0240_001.jpg
stock cams
http://www.norcalevo.net/gallery/albums/album16/Dscn0246_001.jpg
tensoner tool
http://www.norcalevo.net/gallery/albums/album16/Dscn0248.jpg
intake cam removed
http://www.norcalevo.net/gallery/albums/album16/Dscn0251.jpg
hks cams are in!
http://www.norcalevo.net/gallery/albums/album16/Dscn0254.jpg
http://www.norcalevo.net/gallery/albums/album16/Dscn0257.jpg
EvolvedDSM
07-16-2004, 12:48 AM
Looks like fun :D
vtluu
07-16-2004, 12:57 AM
Evo Motorsports has a lengthy write-up on how to do a camshaft install: http://www.evomoto.com/tech_info.php?techID=18
Not something I'd try on my own! :worthy:
wilson1
07-16-2004, 09:08 AM
Wow,,, ob4, you really did it!
evo_dadi
07-16-2004, 11:40 AM
nice work terry!! did you go with a mix set up(264/272) or paired(264/264)?
Thanks, Marcel! I have the 264/272 cams.
The installation was pretty straight forward. The cam angle sensor bolt was a bit hard to get to, but I have a u-join, so it makes the job a lot easier. The cam gear bolt was also pretty tight, but a good breaker bar will do the job. Make sure that you line up the tdc position for the cams and crank, and not move the crank after the gears and belt is off. There is so much fun and satisfaction in doing your own project and you know you will never do a half ass job.
-ob4
evo_dadi
07-16-2004, 04:48 PM
so this brings you to stage +1 now? its time to hit the dyno for sure :)
After cam gears:
http://www.norcalevo.net/gallery/albums/album16/Dscn0260.jpg
After dyno:
http://www.norcalevo.net/gallery/albums/album16/dyno_stage1.sized.jpg
Also saw a silver evo, had the dyno appt after mine. Nice seeing you!
-ob4
Gruppe-S
07-21-2004, 09:44 AM
well done, Terry! :) Congrats on the new mods!
Cal
Hi Cal,
Thanks for the hks cam hook up! Not to mention great price too!
-Terry
Nice pics. What type of exhaust system are you using? dp, cat, catback manufactorers.
Was that a standard xflash or did you have it dyno tuned as well?
ace33joe
07-21-2004, 03:06 PM
Congratulations, Terry!
Wasn't your Samco hose kit blue?
Anyhow, I hope you like your new cams. :)
wot: i've the greddy ti exhaust, random tech cat, perin dp. It's a custom tune xflash.
ace33joe: the samco hose kit was always red.
ace33joe
07-21-2004, 04:22 PM
Haha, I might have been confused. :) Anyhow, red one looks great in your engine room!
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.