trinydex
10-08-2007, 11:07 AM
I searched and could not find a how-to on installing the Perrin 25mm swaybar / sway bar so I decided to help others out with one of my own.
How-to install Perrin 25mm swaybar & stout mounts.
1. Remove the nuts holding the stock rear swaybar to the endlinks.
2. Remove the passenger-side rear wheel and then wiggle the top rubber muffler mount off of the hangar as seen below.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2001.jpg
3. Remove the bolt holding the muffler up at the rear rubber muffler mount as seen below.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2002.jpg
4. Now remove the 2 bolts holding the 3rd rubber muffler mount to the chassis as seen below. This will allow you to lower the exhaust system low enough for the stock bar to be removed.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2003.jpg
5. Now remove the 4 bolts keeping the OEM stock bar connected to the car's frame and then wiggle the bar out starting with the muffler side.
6. Once the OEM bar is out, installation is simply reverse of above. Do not forget to lube the rubber bushing that came with the Perrin bar.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2004.jpg
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2005.jpg
from: http://forums.evolutionm.net/showthread.php?t=245204
How-to install Perrin 25mm swaybar & stout mounts.
1. Remove the nuts holding the stock rear swaybar to the endlinks.
2. Remove the passenger-side rear wheel and then wiggle the top rubber muffler mount off of the hangar as seen below.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2001.jpg
3. Remove the bolt holding the muffler up at the rear rubber muffler mount as seen below.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2002.jpg
4. Now remove the 2 bolts holding the 3rd rubber muffler mount to the chassis as seen below. This will allow you to lower the exhaust system low enough for the stock bar to be removed.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2003.jpg
5. Now remove the 4 bolts keeping the OEM stock bar connected to the car's frame and then wiggle the bar out starting with the muffler side.
6. Once the OEM bar is out, installation is simply reverse of above. Do not forget to lube the rubber bushing that came with the Perrin bar.
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2004.jpg
http://www.socalevo.net/gallery/albums/userpics/10991/INSTALL%20Perrin%2025mm%20rear%20swaybar%20%26%20s tout%20mounts%2005.jpg
from: http://forums.evolutionm.net/showthread.php?t=245204