PDA

View Full Version : custom intake filter sizing



trinydex
10-08-2007, 11:51 AM
for those of you that wish to "retrofit" a k&n filter onto your maf or even for a custom turbo intake application. this portion of k&n's site should be very useful.

http://www.knfilters.com/search/univcone.aspx


3 and a quarter is what the inside diameter of a hose would be, but I think you want the other side if you are hooking up a filter. For that you will need an adaptor. ebay has them for around ten bucks.
the side to the hose - turbo is 3 and 3/16 or so.
the side to the filter is sort of square.
If you are looking for a k&n filter, I just happen to have the offical k&n maf adaptor AND a k&n filter. cheap. I am using something else, so it is a wasted part in my garage

http://bolsen.homeip.net/temp/Project/intake/album/index.htm

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06343_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06344_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06345_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06346_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06347_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06348_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06349_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06350_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06351_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06352_JPG.jpg

http://www.socalevo.net/gallery/albums/userpics/10991/normal_DSC06353_JPG.jpg

Awesome!

ok so what the pictures show...

turbo inlet diameter is approx 3". the actual hose is about 3" outter diameter which insures a snug fit.

factory maf outlet is a cool 3" inches inner diameter which is then clamped to the turbo tube.

the stock intake pipe places hte maf about 12" away from the turbo horizontally.

maf inlet is about 3.5" wide and 2.5 inches tall. this hooks up to a maf adapter plate which then puts you into a 3" cone filter.

length of the maf unit is 4" in case you need to calculate where the filter goes in that custom induction box.

for more options on intake boxes check out 500whp.com

beatrush intake box
http://www.500whp.com/catalog/product_info.php?cPath=26_28&products_id=2307&osCsid=2b1c4bc2c8eb6433c37fedafe1932625

apexi induction box
http://www.500whp.com/catalog/product_info.php?cPath=26_28&products_id=79&osCsid=2b1c4bc2c8eb6433c37fedafe1932625

ok everyone take note the hks rs intake uses a 4" maf adapter... previous post has been edited to clarify this for all.

here is the k&n store you can buy the filters from

http://shop.knfilters.com/KNShop/SearchByPart.aspx