PDA

View Full Version : How To: Change your keyless entery Answerback



lqdchkn
09-09-2008, 06:46 PM
Figured I'd write this up from the Owner's Manual for those out there that don't have one.

Answerback function

The keyless entry system answerback functions from the horn and turn signal lights can be turned on and off as desired. This is done with the key removed from the ignition switch.

NOTE
The answerback function is not provided when the key is in the ignition switch.

Horn deactivation/reactivation
The answerback function can be set in the following three wasy. Each time the answerback function is set, a tone will sound to tell you the condition of the answerbackfunction.

One chime: The horn will sound if the doors are locked with the keyless entry system.

Two chimes: The horn will not sound, even if the doors are locked with the keyless entry system.

Three chimes: The horn will sound if the doors are already locked and the keyless entry system is used. In this mode, the horn will only sound when the keyless entry LOCK button is pressed again to reconfirm that the doors are locked.

1. Press the LOCK button for 4 to 10 seconds and press the UNLOCK button during this time.
2. Release the LOCK and UNLOCK buttons within 10 seconds of pressing the UNLOCK button in step1.

Turn signal light deactivation/reactivation
The answerback function from the turn signal lights indicating when the doors are locked or unlocked can be turned on or off separately. A tone will sound once when the function has been turned on, and twice if it has been turned off.

To deactivate/reactivate the answerback function for the locking of the doors, take the following steps:
1. Press the UNLOCK button for 4 to 10 seconds and press the LOCK button during this time.
2. Realease the LOCK button and then release UNLOCK button within 10 seconds of pressing the LOCK button in step1.

To deactivate/reactivate the answerback function for the unlocking of the doors, take the following steps:
1. Press the UNLOCK button for 4 to 10 seconds and press the LOCK button during this time.
2. Release the UNLOCK button and then release the LOCK button within 10 seconds of pressing the LOCK button in step1.

RREVOVIII
09-09-2008, 07:10 PM
it works :thumbsup:

THANKS!

EVODREW
11-11-2008, 03:59 PM
good write up for those with no manual like me......

hinkle0856
08-18-2009, 06:53 PM
Nice was wondering if it could be done, worked like a charm...

spdy EVO
08-18-2009, 06:55 PM
Thank you!

WWEVOVIII
08-18-2009, 07:49 PM
and for people who have after market viper alarms like me they can take it out of their car and follow the steps above :D

RREVOVIII
08-21-2009, 08:11 PM
and for people who have after market viper alarms like me they can take it out of their car and follow the steps above :D

that would be a bad upgrade :cheesy: from an Alarm to Keyless Entry :icon_axe: