redvolution
10-07-2009, 10:02 AM
$1500 shipped for everything (or $1450 picked up in NorCal)
Fits under 17" wheels
Stoptech 332x32 front kit AND 2pc rear rotors from RacingBrake. I bought the Stoptechs 2 years ago from GST and they've performed flawlessly. More details on the Stoptech kit:
- ST40 calipers and mounting brackets
- 332x32 rotors with almost new rotor rings (rotors weigh 17.6 lbs each - 4lbs less than stock)
- new dust boot and piston seal kit for both calipers ($100 in rubber O-rings)
- almost new Axxis Ultimate street pads
- front Stoptech SS lines (not shown)
- original shipping boxes and manuals
- Ti shims and Hawk pads not include despite the pic below
An extra bonus of this kit is that ST40 pads are generally $50 cheaper than stock Evo pads.
http://cracknut.smugmug.com/photos/675871235_RxqQF-XL.jpg
2pc rear rotors (note iron hats for parking brake use)
http://cracknut.smugmug.com/photos/675871003_jMbhi-L.jpg
dust and piston seals:
http://cracknut.smugmug.com/photos/675871268_gkoMu-L.jpg
washing the rotor rings before installation:
http://cracknut.smugmug.com/photos/675871255_DfU2T-L.jpg
Fits under 17" wheels
Stoptech 332x32 front kit AND 2pc rear rotors from RacingBrake. I bought the Stoptechs 2 years ago from GST and they've performed flawlessly. More details on the Stoptech kit:
- ST40 calipers and mounting brackets
- 332x32 rotors with almost new rotor rings (rotors weigh 17.6 lbs each - 4lbs less than stock)
- new dust boot and piston seal kit for both calipers ($100 in rubber O-rings)
- almost new Axxis Ultimate street pads
- front Stoptech SS lines (not shown)
- original shipping boxes and manuals
- Ti shims and Hawk pads not include despite the pic below
An extra bonus of this kit is that ST40 pads are generally $50 cheaper than stock Evo pads.
http://cracknut.smugmug.com/photos/675871235_RxqQF-XL.jpg
2pc rear rotors (note iron hats for parking brake use)
http://cracknut.smugmug.com/photos/675871003_jMbhi-L.jpg
dust and piston seals:
http://cracknut.smugmug.com/photos/675871268_gkoMu-L.jpg
washing the rotor rings before installation:
http://cracknut.smugmug.com/photos/675871255_DfU2T-L.jpg