PDA

View Full Version : 1994 camaro built motor



Jbalke212
10-21-2009, 08:37 PM
Hey whats up guys im posting this up here for my brother as he is trying to get rid of the car as he dosent have time to drive it anymore. There is nothing wrong with the car at all it runs really strong i was there when there car got dyno tuned we trailered it there. If you guys have any other questions you can send me a pm and i can answer it or i can give you my bros number. The car has been sitting in his garage for about 5 years with the inly time he drove it being after the motor and tune.

Thanks Jon



Here is the ebay Link

http://cgi.ebay.com/ebaymotors/Chevrolet-Camaro-94-CAMARO-383-STROKER-400-HP-105-MILES-ON-THE-REBUILD_W0QQcmdZViewItemQQhashZitem1c0d618bd7QQite mZ120483580887QQptZUSQ5fCarsQ5fTrucks#ht_560wt_116 7

Here is some of the upgrades

94’ Camaro parts list
enigine:
· JE Forged Pistons with the ringland moved down for nitrous $449.99

· Forged Eagle Connecting Rods $638

· Forged Lunati Crank Shaft

· Intake was ported and polished by GTP $295

· GTP Stage Two Heads $1999 http://gtp-racing.com/

· GTP 6 Billet Cam $395 http://gtp-racing.com/

· ATI Super damper $399.99

· Optima red top battery $169.99

· Hypertech 160 degree thermostat

· Arp head studs $119.99

· Re ceramic coated headers $225

· Walbro in tank 255 Liters Per Hour $129.97

· Arizona Speed and Marine 54 mm Throttle Body $450

· 30# SVO injectors $219.88

· Crane roller lifters $209

· GM extreme duty timing set $299.99

· Cloytes oversized crank sprocket $40

Machine Work:
· 4 bolt splayed caps

· boil, and glass bead the block. Bore and hone block w/ torque plates, align bore for 4 bolt caps, surface block, clearance block for stroker kit, machine pistons for clearance on pin side, balance rotating assembly, assemble crankshaft and piston assembly. $2500


Computer:
· New Engine control module $180.00


Ignition:
MSD coil and 6AL box
Steering:
· New ARI rack and pinion steering $190.95

· New Tie Rod ends $81.02

· New wheel bearings $305.95

Suspension:
· BMR K-Member black $439.95 http://www.bmrfabrication.com/F-bodyChassis.htm

· BMR Upper and Lower a-arms $579.99 http://www.bmrfabrication.com/F-bodySuspension.htm

· Spohn Torque Arm with front and rear drive shaft loops black $484.87 http://www.spohn.net/shop/1993-1997-GM-F-Body/Suspension/Torque-Arms/Tubular-Adjustable-Torque-Arm-Long-Tube-HeadersY-Pipe.html

· LG G2 weld in subframe connectors $199.00

· LS1 front spindles, brake calipers, and caliper mounts

· Ground control front coil over koni (single adjustable) 750# springs, koni (single adjustable) shock with 250# springs on an adjustable perch in the rear. $986.90

· powdercoating for spindles, swaybar, and capiler brackets $250

· Spohn adjustable lower control arms in the rear $209 http://www.spohn.net/shop/1993-1997-GM-F-Body/Suspension/Rear-Lower-Control-Arms/Lower-Control-Arms-Tubular-Adjustable-with-Spherical-Rod-Ends-Offset-Spacers.html

· Spohn adjustable panhard bar $139 http://www.spohn.net/shop/1993-1997-GM-F-Body/Suspension/Panhard-Bars/Panhard-Bar-Tubular-Adjustable-with-Spherical-Rod-Ends.html



Brakes:
· Baer drilled and slotted 2 piece Eradispeed Plus rotors (98’-02’ due to the spindle, caliper, and caliper mount swap) in the front $467 http://www.thunderracing.com/catalog/?action=shop&sid=52&pcid=21



Drivetrain:
· McLeod Street Twin dual disc Clutch with steel flywheel $715.00 http://www.mcleodind.com/product_guide.html

· 1LE Aliminum drive shaft

· prothane motor mounts

Seats:
· Corbeau Carrera black seats (qty 2) $745.00



Roll Bar:
· Wolfe Race Craft 4130 cromoly 6 point black powdercoat bar $942.84 http://www.wolferacecraft.com/detail.aspx?ID=289


Over $15,000 in receipts not including misc parts and the car itself

99% of everything here has 105 miles on it.