david buschur
05-16-2005, 06:27 AM
Hi guys,
I think many times with our Staged upgrade packages that we offer people don't think of coming to us for any real custom work.
We have probably built more real 4g63 powered race cars out of here than most people can even imagine.
There are other shops doing these same things and if you have a year or two to wait for your car to be finished they can do a nice job for you. Around here we don't want your car that long so we get the cars in, do the job right and get the cars out.
We had a wrecked '03 EVO8 come in, we are going to be building the car here completely. We will be posting up pictures as we go so you guys can see not only the quality of the custom work we do here but the speed at which a car can go from a stock junk heap to a finished kick ass vehicle.
Below you can see the tire and wheel package that is being used, we had to take a test fitment today and Jarrod snuck in and took the picture.
http://img.photobucket.com/albums/v224/jrod@buschur/EVOCenterline.jpg
Three days ago we pulled the crushed engine/trans/transfer case from this car.
Yesterday the trunk pan was cut out of the car, new flat floor welded into the car, seam sealed.
Today we painted the rear pan that was welded in, installed the aluminum fire wall between the passenger compartment and trunk area. Also put the rear bumper cover back on, rear tail lights in, mounted the carbon fiber trunk lid, bolted the fuel cell in, ran the vent tube, feed and return lines, mounted and plumbed the pump/filter and ran the heavy gauge ground for the pump.
http://img.photobucket.com/albums/v224/jrod@buschur/HPIM1381.jpg
http://img.photobucket.com/albums/v224/jrod@buschur/EVOBottom.jpg
Those are the pictures. So far three days in this project. Hope you guys enjoy the quality of our work and the build up we are doing on this car.
David Buschur
www.buschurracing.com
I think many times with our Staged upgrade packages that we offer people don't think of coming to us for any real custom work.
We have probably built more real 4g63 powered race cars out of here than most people can even imagine.
There are other shops doing these same things and if you have a year or two to wait for your car to be finished they can do a nice job for you. Around here we don't want your car that long so we get the cars in, do the job right and get the cars out.
We had a wrecked '03 EVO8 come in, we are going to be building the car here completely. We will be posting up pictures as we go so you guys can see not only the quality of the custom work we do here but the speed at which a car can go from a stock junk heap to a finished kick ass vehicle.
Below you can see the tire and wheel package that is being used, we had to take a test fitment today and Jarrod snuck in and took the picture.
http://img.photobucket.com/albums/v224/jrod@buschur/EVOCenterline.jpg
Three days ago we pulled the crushed engine/trans/transfer case from this car.
Yesterday the trunk pan was cut out of the car, new flat floor welded into the car, seam sealed.
Today we painted the rear pan that was welded in, installed the aluminum fire wall between the passenger compartment and trunk area. Also put the rear bumper cover back on, rear tail lights in, mounted the carbon fiber trunk lid, bolted the fuel cell in, ran the vent tube, feed and return lines, mounted and plumbed the pump/filter and ran the heavy gauge ground for the pump.
http://img.photobucket.com/albums/v224/jrod@buschur/HPIM1381.jpg
http://img.photobucket.com/albums/v224/jrod@buschur/EVOBottom.jpg
Those are the pictures. So far three days in this project. Hope you guys enjoy the quality of our work and the build up we are doing on this car.
David Buschur
www.buschurracing.com