PDA

View Full Version : HAWK BRAKE BEDDING PROCEDURE



slo10
01-21-2011, 01:15 PM
Just had hawk pads installed and here is the bedding procedure from hawk. I am not sure but possibly could be used with other pads as well.

After installing new brake pads, make 6 to 10 stops from approximately 30-35 mph applying moderate pressure.
Make an additional 2 to 3 hard stops from approximately 40 to 45 mph.
DO NOT DRAG BRAKES!
Allow 15 minutes for brake system to cool down.
After step 4 your new pads are ready for use.