Jakeg97
08-02-2005, 04:28 PM
Not really much to the install...
1. purchase a Zaklee Sightglass Clear Cam Gear Cover
www.zakleecorp.com
2. use a 10mm wrench or ratchet w/ 10mm socket
btw - this cover will fit aftermarket cam gears and evo engines 4-8
Step 1
Unpack your new cover
http://www.hostdub.com/albums/burningmoney97_album01/clear_cam_cover_1.sized.jpg
as you can see the cover is made of good quality
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_a.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_b.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_c.sized.jpg
Step 2
Remove the 4 bolts from each corner of stock cover
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_1.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_3.sized.jpg
Bottom left bolt is the most difficult to remove
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_2.sized.jpg
Step 3
Set aside old cover
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_5.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_4.sized.jpg
Step 4
Ease in new cover
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_6.sized.jpg
Step 5
Reuse the stock bolts from the old cover and tighten
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_8.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/clear_cam_cover.sized.jpg
Step 6
Start your car and watch
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_11.sized.jpg
1.9mb video clip= Engine Start (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTAyMDU5OTZzNDEzZGZkMzF5NTQx)
cam gears in action ^^
1. purchase a Zaklee Sightglass Clear Cam Gear Cover
www.zakleecorp.com
2. use a 10mm wrench or ratchet w/ 10mm socket
btw - this cover will fit aftermarket cam gears and evo engines 4-8
Step 1
Unpack your new cover
http://www.hostdub.com/albums/burningmoney97_album01/clear_cam_cover_1.sized.jpg
as you can see the cover is made of good quality
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_a.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_b.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_c.sized.jpg
Step 2
Remove the 4 bolts from each corner of stock cover
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_1.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_3.sized.jpg
Bottom left bolt is the most difficult to remove
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_2.sized.jpg
Step 3
Set aside old cover
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_5.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_4.sized.jpg
Step 4
Ease in new cover
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_6.sized.jpg
Step 5
Reuse the stock bolts from the old cover and tighten
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_8.sized.jpg
http://www.hostdub.com/albums/burningmoney97_album01/clear_cam_cover.sized.jpg
Step 6
Start your car and watch
http://www.hostdub.com/albums/burningmoney97_album01/cam_cover_11.sized.jpg
1.9mb video clip= Engine Start (http://www.we-todd-did-racing.com/wetoddimage.wtdr/wMTAyMDU5OTZzNDEzZGZkMzF5NTQx)
cam gears in action ^^