PDA

View Full Version : 05 evo turbo back with ecutek dyno result



EIPracing
09-21-2005, 07:15 PM
this is the dyno results for 05 evo8 with ecutek flash with only a down pipe & cat back system with a cat. the only difference this 05 is a bigger turbo on the hot side.
btw the car is only peak 21.5psi and tapers down to 17psi.
and that's the way the customer wants it.
so the if keep at 19psi will shoot up more hp around 4k to 7k


thank you

http://www.norcalevo.net/gallery/albums/album293/05evoturboback.sized.jpg

brwnrice
09-22-2005, 09:25 AM
those are some nice numbers

bdking57
09-22-2005, 03:57 PM
Paul was slaving over the dyno for some time to get this car dialed in.. afterall it was his ecutek test subject. I bet all that time has resulted in some great base maps for flashes :wink:

Steiner
10-04-2005, 05:32 PM
Seems high for a Mustang dyno. With a cat-back and drop in filter I was told to expect between 215whp and 230whp on the Gruppe-S dyno after my EcuTek flash. I guess their setup is just more conservative.

EIPracing
10-05-2005, 01:36 AM
the number is not a really big issue, and is how much the different that change before and after. btw the 215whp and 227.7tq that is with the drop in filter and the cat back system(no flash). i am pretty sure if you flash with ecutek and tuned you should getting really close to this result


Seems high for a Mustang dyno. With a cat-back and drop in filter I was told to expect between 215whp and 230whp on the Gruppe-S dyno after my EcuTek flash. I guess their setup is just more conservative. :D :D :D