PDA

View Full Version : evom evo dave blacked out headlights....



b0yw0nder
10-30-2005, 07:27 PM
WOW....that guy must be making a fortune

135$ to paint headlights
145$ for taillights!

100bucks to refinish the headlights to pull the scratch out of them....

missred
10-30-2005, 07:35 PM
Tell me about...

b0yw0nder
10-30-2005, 07:39 PM
so, what other options exist?

missred
10-30-2005, 07:56 PM
so, what other options exist?

I was wondering if the Evo 9 heads will fit like a glove on the 8s. I really dig that black chrome or gunmetal look. I think they should've done that with 8s in the first place. Was also wondering since it's USDM if the price would be cheaper than the JDM MR headlights? Hmmm I may look into that... :idea:

missred
10-30-2005, 07:58 PM
Anybody know if this could work, replace the 8s headlight with the 9? may be a long shot, but does anybody know cost of the heads?

b0yw0nder
10-30-2005, 08:01 PM
they will fit but will not be cheaper than JDM

i think stock headlights are like 375 each.

9 replacement parts arent available yet"?

missred
10-30-2005, 08:06 PM
they will fit but will not be cheaper than JDM

i think stock headlights are like 375 each.

9 replacement parts arent available yet"?

Damn... I take you've look into that option already. Maybe will get lucky someone may not want that look and ask for a trade for the 8s heads....Yeah I know, wishful thinking. :lol:

b0yw0nder
10-30-2005, 08:14 PM
ya...originally i wanted to just buy a set of stock headlights and have them blacked out...keeping my stockers

DJMic0
10-30-2005, 08:18 PM
Does anyone in NCE do black housing that is better than those rates?

b0yw0nder
10-30-2005, 08:21 PM
there is evo_dadi...

but i really haven't been able to get a hold of him

evo_dadi
10-30-2005, 10:12 PM
really sorry for being hard to get a hold of lately :oops: been busy for a while at work so usually when i get home the rest of my time is spent with the family.hey jared on that clearing the scratch is it ont he outside or inside?? outside is pretty easy and charging $100 is overkill while you can just buy the polish for it for about $5 a bottle and still have plenty left when you decide to clean it again later.

b0yw0nder
10-30-2005, 10:14 PM
the scratch is small and on the outside.

hit me with a PM or e-mail about how much you'd charge to black out some headlights and tails and maybe fix a scratch.

if you're busy with the family and stuff, I COMPLETELY understand....

evo_dadi
10-30-2005, 10:16 PM
its still the same price that i told you last time :D just send me a pic of that scratch and ill take it out also while im blacking them out.

b0yw0nder
10-30-2005, 10:17 PM
cool....

missred
10-30-2005, 10:19 PM
its still the same price that i told you last time :D just send me a pic of that scratch and ill take it out also while im blacking them out.


Evo dadi Im very interested also bro, man how do I make an appointment to get it done. Please hit me up...PM me or something Bro and let me know. :P

evo_dadi
10-30-2005, 10:51 PM
i got you in my list already pare 8)

missred
10-30-2005, 10:53 PM
right on Pare :D

DJMic0
10-30-2005, 11:09 PM
I'm interested please PM me a price evo dadi!!!!

redtydsf
10-31-2005, 07:42 AM
i got you in my list already pare 8)
pare!!me too, sige na dood, mag blaak out party dood. :lol: can you pm me, i need my tails done.

DRFTR8
10-31-2005, 09:20 AM
hey marcel, try using a new paint instead of the flat black... its a new paint from Dupli-color.. its called Metalcast.. MC-206 Smoke.. if you spray it on the chrome, you will have the same affect like the new Evo IX lights.. try using that one...here is the process to achive that look...

Using METALCAST™ to achieve an anodized look

Dupli-Color® METALCAST™ Anodized colors are formulated to work over properly prepared shiny bare metal, faux chrome-like surfaces or METALCAST™ Ground Coat to provide a high gloss anodized look. METALCAST™ colors are heat resistant up to 500º (intermittent). Oil and gas resistant. Ideal for valve covers, air cleaners, water pumps, calipers, and oil pans. Can be sprayed directly on properly cleaned and sanded bare metal.


--------------------------------------------------------------------------------
Step 1:
Prepare surface: Remove rust, loose paint, dirt, grease and wax from bare metal surface. Wash with mild soap and water, rinse, and dry well.

Step 2:
Lightly sand surface with 400 grit sand paper or a Red Scotch Brite® Pad and remove sanding dust.

Step 3:
Mask off adjacent areas.

Step 4:
Use at room temperatures between 50º-85º and relative humidity is less than 50%. Shake can until mixing ball begins to rattle. Grasp top of can and swing in a circular motion for 2 minutes. Shake can for 10 seconds after each minute of use.

Step 5:
METALCAST™ can be sprayed over properly prepared bare metal surfaces or the METALCAST™ Ground Coat. The anodized effect can only be achieved over properly prepared bare metal or METALCAST™ Ground Coat.

Bare metal:

For maximum adhesion, apply CP199 Adhesion Promoter before applying METALCAST™ paint to surface. Apply light coats with can 8-12 inches from surface. Use an even sweeping motion holding can parallel to the surface. Allow 5 to 10 minutes dry time between each coat. Recoat METALCAST™ colors within 1 hour or after 5 days to prevent recoat lift.

Painted/non-metal surface:

Apply METALCAST™ Ground Coat as directed. Let METALCAST™ Ground Coat dry 30 minutes before applying METALCAST™ Anodized color.

Important:

For maximum adhesion, apply CP199 Adhesion Promoter before applying METALCAST™ paint to surface. If spray button becomes clogged, wipe clean with lacquer thinner. Do not stick pins or wire into can opening. After use invert can and spray until clear gas comes out.

evo_dadi
10-31-2005, 12:08 PM
ive seen the lights on the evo9 and they dont look right man :shock: i still ike the original jdm look.

b0yw0nder
10-31-2005, 02:13 PM
agreed....

hey ED...here's the scratch on the lense...

http://www.norcalevo.net/gallery/albums/album341/DSC01195.sized.jpg

it doesn't seem that deep at all...there are some other light scratches that should be easy to pull out

dope619
10-17-2011, 03:23 PM
is this still happening?

evodragon915
11-09-2011, 01:29 PM
..... this thread is from 05, alot of people already moved on to new cars and havent been on this forum for awhile. i remember back in 06 this forum was hella cracking :/

SavageEvo8
11-11-2011, 10:00 AM
if you want your housings painted, i can do em for ya. i dont crack open the tails, but i can take care of the headlights no problem