PDA

View Full Version : Intake Hose....Help!!



cooliodb
12-11-2005, 06:44 PM
Hey Guys and Gals,
I have what is probably going to seem like a stupid question, but here goes......

I was cleaning the filter on my AEM intake and when I removed the filter I noticed a hose that had split and come loose. It is the small vacuum tube that plugs into the bottom of the intake. I can't seem to locate where it goes to. It hasn't seemed to effect performance, but I'd like to get it where it belongs.
I'd post pics but don't have a camera, so any help you may have is greatly appreciated.

Thanks,
Chris

SJCoruja
12-11-2005, 08:01 PM
Hmmm...sounds like the hose that goes from the boost control solenoid to the intake. If so, very bad to leave off as a) you're not effectively controlling/managing the airflow and b) you're allowing unfiltered air to enter the turbo after the MAF. :shock:

EvoRicer
12-12-2005, 02:21 AM
I think that line is the line that goes to the Intake Nipple (small nipple at the bottom side of the intake) and the Stock Boost control solenoid (Bottom Nipple).