PDA

View Full Version : Pulling pins out of ECU harness?



Matz
01-18-2006, 08:06 PM
All I could find was a nice article here about installing an S-AFC II (http://www.norcalevo.net/forums/viewtopic.php?t=4107&highlight=ecu+harness+remove+pin), but what I *really* want to know is how to get the crimps out of an S-AFC II harness. With earlyapex's recommendation, I ordered a spare harness from fasterthanthem.com for a great price ($55!). I now want to use it to install my ECU+. Well, I really hate electrical tape, and I want to pull the crimps out so I can use shrink tube instead. I've been jabbing at the crimps (thinking there's a tab there somewhere) with every little tool in our office. I still can't get the damn things out.

Can someone please clue me in on this? Thanks!!!

SouthernCrane
01-18-2006, 08:18 PM
Check the Vishnu website, there should be a write up on there how to remove the boost wire. It was pretty easy to do when i had the XEDE.

http://www.vishnutuning.com/evo_install_xede.htm

Matz
01-18-2006, 10:14 PM
Thanks for the link! It's a slightly different connector, but I'll try it again tomorrow.