View Full Version : Will a BOV for a 2G DSM work on the EVO?
I got a 2G DSM Greddy Type-S BOV kit that's been sitting in my garage forever. I was just wondering if it will work on our EVOs? It comes with the flange adaptor. Not sure if it'll fit on our car. Anyone know for certain?
MarkSAE
03-05-2006, 09:37 AM
Yeah, it should work. The stock plastic 2g BOV looks almost identical to the stock 03-05 EVO plastic BOV. The only difference is the nipple orientation.
crctslt
03-05-2006, 11:19 PM
It will work. You need the Evo adapter however.
try www.roadraceengineering.com
Jamie@WORKS
03-06-2006, 11:58 AM
Yeah, it should work. The stock plastic 2g BOV looks almost identical to the stock 03-05 EVO plastic BOV. The only difference is the nipple orientation.
...and the ability to hold boost ;) I don't think my 2G valve could muster more than 12 PSI.
It will work. You need the Evo adapter however.
The 2G and EVO adapters should be the same.
MarkSAE
03-06-2006, 12:01 PM
So a stock EVO BOV should be a cheap upgrade for 2g's!
earlyapex
03-06-2006, 12:08 PM
So a stock EVO BOV should be a cheap upgrade for 2g's!
Not really when all the DSMers have done that upgrade but with a whole evo included as well. :D
spoolin
03-09-2006, 07:38 PM
Ditch that and get the MR Valve..
crctslt
03-09-2006, 08:01 PM
So a stock EVO BOV should be a cheap upgrade for 2g's!
Not really when all the DSMers have done that upgrade but with a whole evo included as well. :D
BLEH
Jamie@WORKS
03-13-2006, 11:28 AM
Ditch that and get the MR Valve..
He has a IX, which comes with the "JDM MR" valve.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.