PDA

View Full Version : putting cam gears on stock 9 cams



baysic evo
07-17-2006, 04:15 PM
i was wondering if anyone has put adjustable cma gears on
stock evo9 cams? since there isn't really any cams out for them just yet. i found 1 set from turbo trix i belive, but they want like 900 for them.

i know i put them on some type r cams i had, but don't know if they would work on this motor as well with out installing some better lift cams. was wondering if there would be some power gained form this mod. and if you have put them on what was your best setting? both advanced or a veriation of some sort.

just wondering since i have serched but couldn't find anything on the stock cams.

KareBearPowa
07-17-2006, 04:18 PM
You could only put one on the exhaust cam because the intake one has the Mivec assembly.

baysic evo
07-17-2006, 06:55 PM
o.k well thanks did not know that.

KareBearPowa
07-17-2006, 08:10 PM
Yup and you can control the intake advance/retard via a flash since that is what Mivec is. IMHO you would get more power that way then a adjustable cam gear on the exhaust side.