View Full Version : any one running an AMS MBC
ApexVIII
07-17-2006, 07:29 PM
i am going to order a MBC really soon and i was wondering if any one hade any input or used a AMS MBC... they are only $60.
KareBearPowa
07-17-2006, 08:01 PM
Dejon tool for $50
http://all.dejonpowerhouse.com/edit/A-03.htm
been using them for years.
lncrevoviii
07-17-2006, 08:18 PM
wow, that is cheap and stealthy. even the $90 one, with the toggle switch. 8)
ApexVIII
07-18-2006, 10:06 AM
so what is safe boost untuned? 21PSI? because im thinking baout getting the 2 stage one one for 18ish(stock setting) PSI and one for 21... how much more power would be gained? bumping 2-3 PSI and it holding better? 17 HP?
KareBearPowa
07-18-2006, 10:26 AM
20 is stock.
ek9_evo9
07-18-2006, 10:31 AM
id be careful about messing with boost and not thinking about getting a tune yet.
ApexVIII
07-18-2006, 11:49 AM
i only get 19 stock so setting it for 21 is to much? should i just set it for 20 even though that is the same as stock? if i set it for stock then it will only help with taper right?
I've never used an MBC before... only EBC. Just set the target boost and the electronics do all the rest.
Endoe
07-19-2006, 12:16 AM
so how is it compare to the Hallman Pro RX Boost Controller Kit...? AMS vs Hallman?
chuckdashi
07-19-2006, 03:03 AM
from what i know if you set the manual boost controller at 21 that would be your peak and once it tapers... it will still taper by the way... thats when it would hold around 19....
please do correct me if im wrong
ApexVIII
07-19-2006, 02:23 PM
from what i know if you set the manual boost controller at 21 that would be your peak and once it tapers... it will still taper by the way... thats when it would hold around 19....
please do correct me if im wrong
ya thats what i think it does and thats what i was planning on setting it at 21psi does anyone think thats too much???
Id go with the forge one, simply because it has a definate "click" with each adjustment, with each click being .5PSI
ApexVIII
07-28-2006, 11:22 AM
Dejon tool for $50
http://all.dejonpowerhouse.com/edit/A-03.htm
been using them for years.
i ordered the $49 mbc from there 8days ago, how long does it take for shipping? and i can set the boost for 20 psi right? because now i only spike 18.5. so would 20 be safe with out a tune?
dohcvtec
07-28-2006, 11:26 AM
an MBC is an MBC, they should all "perform" the same.
nightwalker
07-31-2006, 06:39 PM
an MBC is an MBC, they should all "perform" the same.
...not true sir
Id go with the forge one, simply because it has a definate "click" with each adjustment, with each click being .5PSI
Are you sure its 0.5psi per click? I estimated 0.725psi per full rotation (forgot how many clicks, but I think it's around 10). I have the UNOS and I think I'm using the light spring.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.