for those of you that wish to "retrofit" a k&n filter onto your maf or even for a custom turbo intake application. this portion of k&n's site should be very useful.
http://www.knfilters.com/search/univcone.aspx
http://bolsen.homeip.net/temp/Projec...lbum/index.htmOriginally Posted by nothere
Awesome!
ok so what the pictures show...
turbo inlet diameter is approx 3". the actual hose is about 3" outter diameter which insures a snug fit.
factory maf outlet is a cool 3" inches inner diameter which is then clamped to the turbo tube.
the stock intake pipe places hte maf about 12" away from the turbo horizontally.
maf inlet is about 3.5" wide and 2.5 inches tall. this hooks up to a maf adapter plate which then puts you into a 3" cone filter.
length of the maf unit is 4" in case you need to calculate where the filter goes in that custom induction box.
for more options on intake boxes check out 500whp.com
beatrush intake box
http://www.500whp.com/catalog/produc...7fedafe1932625
apexi induction box
http://www.500whp.com/catalog/produc...7fedafe1932625
ok everyone take note the hks rs intake uses a 4" maf adapter... previous post has been edited to clarify this for all.
here is the k&n store you can buy the filters from
http://shop.knfilters.com/KNShop/SearchByPart.aspx