http://forums.evolutionm.net/showthread.php?t=193838

Quote Originally Posted by Cajun Power
Attached is a list and location diagram of the T-bolt Clamps.

Many people have had problems with IC Hoses blowing off under high boost. There are several fixes. This is probably the cheapest and one of the more permanent solution.

How to:
Remove Under tray.
Remove Front Bumper.
Remove Air box Snorkel.

Now you have access to all the clamps.

If you want to do this right remove the rubber hose and slide both clamps over the ends of the hose and re-install. DO NOT OVER TIGHTEN CLAMPS! You will break the bolt.

My suggestion... I installed about half of my clamps with out removing the hose. This kept the "seal" with the piping. Use caution not to kink the clamp if you try this.