hey i was wandering, what size wastgate should i run with a gt3582r turbo?
hey i was wandering, what size wastgate should i run with a gt3582r turbo?
2003 black Evo8
1/4 et.=12.1 @ 112 mph (gettin sideways out the hole!)
60ft.= 1.7 sec.
and the motor is STOCK!
whats EE? lol
2003 black Evo8
1/4 et.=12.1 @ 112 mph (gettin sideways out the hole!)
60ft.= 1.7 sec.
and the motor is STOCK!
Evoempire.org
03' Lancer Evolution VIII
Apex Silver
thank you. i got it. 38mm wastgate with 15psi spring. thanks guys!!
2003 black Evo8
1/4 et.=12.1 @ 112 mph (gettin sideways out the hole!)
60ft.= 1.7 sec.
and the motor is STOCK!
25-30. why?
2003 black Evo8
1/4 et.=12.1 @ 112 mph (gettin sideways out the hole!)
60ft.= 1.7 sec.
and the motor is STOCK!
Because if you were planning on running more boost then that out of that turbo you would more then likely need a heavier wastegate spring but if your gonna run 25-30 range you should be fine.
06 Evo IX MR___________
-GT35R
-Built Head/Ported, 1mm overs
-Built 2.0L
-Shep Trans
Stock maf maxed out waiting for E-85 speed density setup
I ran a 38mm wg on my old 35r set-up and on 91 i was running right about 27psi.
If you plan to run on lower boost than i'd look into possibly goinng to a bigger wg.
That was on a single spring (recently added another spring as i run high boost almost 100% of the time now)
www.FFTEC.com
www.SparkTechIgnitions.net
QUICKEST ET = 9.825 FASTEST MPH = 146.505
http://www.youtube.com/watch?v=gbdG1uua11c
http://www.youtube.com/watch?v=C6vaJhFy9pg