PDA

View Full Version : How much power!



Hot8Evo
01-01-2007, 09:25 PM
I am trying to think how much i can get after all the mods that i put with no cams...

First Stage

ECUTEK Tuned by EIP 262WHP/275WTQ
91 Octane/76 Gas

Mods:

Injen UICP/Intake
Hallman MBC
Helix V.1 DP
Hi-power Exhaust

Second Stage

I was wondring how much power i gain or what is my whp/wtq right now after i get my re-tune and all this mods i just added to my car..

Add On Mods:

XS Engineering LICP
XS Engineering IC
Helix O2 housing

Soon to add to the car:

HFC and Fuel Pump...

Give me your best bet how much whp/wtq after i all this mods and after re-tune.... Thanks..

spoolin
01-04-2007, 10:12 PM
At best i'd say you'll be up to 275 whp if paul does a damn good tune. You should definitley look into some cams + injectors if you're looking to break the 300 mark.

dabaysevo
01-04-2007, 10:34 PM
You might actually gain some lag with the XS intercooler, the stock one is good for up to 400hp or so. I would spend the money on cams because they would make the biggest gains, plus the lope is sick sounding.

masurie
01-04-2007, 11:05 PM
hmm was wondering why my car only make 275wtq with cams.......is it possible the world sport exhaust cost me a few wtqs?.....

dabaysevo
01-04-2007, 11:19 PM
hmm was wondering why my car only make 275wtq with cams.......is it possible the world sport exhaust cost me a few wtqs?.....
What cams do you have? My 05' always had low torque with the 272's, and it was tuned twice by Mike W. and Shiv. I was thinking cam gear settings but I doubt that would do much, it must have been my part selection, oh well, my mid to top-end hp was pretty good though.

earlyapex1
01-04-2007, 11:31 PM
What boost are you running currently Hot8Evo?

spoolin
01-05-2007, 02:02 AM
What boost are you running currently Hot8Evo?
....+1
Also, like i said 275 whp is almost unachievable w/o aftermarket cams even on a perfect tune. Going back to what mausarie and dabaysevo said, every car is a little bit different. My works 269s make practically the same power as my friends 272s and we have almost identical mods. On the other hand, i also kno another evo who has 269s that falls way short. It all depends on the tune, supporting mods, and what your car likes. It is very hard to compare one evo to another. This is the same reason why there isnt just one "perfect" fuel and timing map for our cars. Each and every evo needs to be tuned individually.

masurie
01-05-2007, 10:38 AM
hmm was wondering why my car only make 275wtq with cams.......is it possible the world sport exhaust cost me a few wtqs?.....
What cams do you have? My 05' always had low torque with the 272's, and it was tuned twice by Mike W. and Shiv. I was thinking cam gear settings but I doubt that would do much, it must have been my part selection, oh well, my mid to top-end hp was pretty good though.


my cams are HKS 264s......and i think cam gear wont do much for 264/264...

spoolinalltheway
01-07-2007, 01:59 PM
im planning to get my car dyno tune by paul in a couple weeks. i have buddy club 272s cams, catback, downpipe and a fuel pump. do you think i should get cam gears before the tune or it wont matter. get cams Hotevo8.

masurie
01-07-2007, 03:33 PM
im planning to get my car dyno tune by paul in a couple weeks. i have buddy club 272s cams, catback, downpipe and a fuel pump. do you think i should get cam gears before the tune or it wont matter. get cams Hotevo8.


if you have 272s i think cam gear can smooth out the idle a bit and also add 2-5whp...

Hot8Evo
01-07-2007, 03:36 PM
What boost are you running currently Hot8Evo?


steady 21psi

When paul tuned my car, he gave me 40whp.

Base run is 222whp stock 8 turbo with injen intake, injen uicp, helix dp, hks exhaust= 262whp/275wtq

and now i added the xs engineering IC,licp,o2 housing and need to re-tune it.. The IC didnt give me lag at all and paul (missred) can prove that.

Looking forward to do this mod this year:

Cams (buddy club)
Cam gears (hks or some local shop brand)
hfc or RRE
manifold injectors,fuel pump....

airforce1
01-07-2007, 04:17 PM
what dynos are you basing numbers on?

Hot8Evo
01-07-2007, 04:20 PM
I think eip mustang dyno?

spoolinalltheway
01-07-2007, 10:50 PM
im planning to get my car dyno tune by paul in a couple weeks. i have buddy club 272s cams, catback, downpipe and a fuel pump. do you think i should get cam gears before the tune or it wont matter. get cams Hotevo8.


if you have 272s i think cam gear can smooth out the idle a bit and also add 2-5whp...
[/quote



but i love the rough idle ahhaa