PDA

View Full Version : Evoscan 2.0 out, now with map tracing...



earlyapex aka jack ass
11-20-2007, 03:19 PM
The Map Tracing is cool, much like logworks, without having to use logworks. ;)

Just played around with the Map Tracing:


FuelMap Vs. 2byte load:
http://www.norcalmotorsports.org/users/bryan/mods/EVO/tech/evoscan2_maptracer_shots/fuelmap_2byte.gif

FuelMap Vs. Wideband AFR:
http://www.norcalmotorsports.org/users/bryan/mods/EVO/tech/evoscan2_maptracer_shots/fuelmap_afr.gif

FuelMap Vs. WGDC:
http://www.norcalmotorsports.org/users/bryan/mods/EVO/tech/evoscan2_maptracer_shots/fuelmap_wgdc.gif

TimingMap Vs. 2byte Load:
http://www.norcalmotorsports.org/users/bryan/mods/EVO/tech/evoscan2_maptracer_shots/timingmap_2byte.gif

TimingMap Vs. Knock:
http://www.norcalmotorsports.org/users/bryan/mods/EVO/tech/evoscan2_maptracer_shots/timingmap_knock.gif

EvoScan v2.0 - Release Notes:
- NEW Graphing with RPM on the x-axis, mapped to any dataitem with options for display including minimum, maximum, average.
- NEW DataItem editing, double click or right click any dataitem. This will automatically update the data.xml file for you instantly. You can also move data items up and down the list. dont forget to put dependant dataitems prior up the list.
- NEW Car PC Interface - new commandline parameters availabe for in car PCs, use evoscan.exe /? to see a list of commands available.
- NEW Editable dataitem definitions of the parameters displayed on Evoscan, the information updates the data.xml file, post it in the forums if you add lots of good information via the dataitem notes window.
- Realtime data graphs support re-introduced.
- Zietronix widebande support for EGT, Boost, RPM, UserAux support is now added. (some reports say boost is accurate, some not, still investigating)
Now supports data.xml eval functions with the bit keyword, great for ascertaining a single or group of bit flags, usage: x bit 32 = 32
- Added option for UK Vehicle Speed Sensor correction.
- Set own global hotkey support for Start/Stop
- Removed autosense baudrate.
- Added jdm boost dataitem.
- Added Wastegate Duty Cycle data item.
- Added 2 byte airflow, you will want to set up your own particular MUT request ids in your ROM.
- Less dataitem flickering, updates only the individually result value cell now, and edraws the remainder of the grid every 10 seconds.
- New bit function operator

Now with 1G DSM SUPPORT!

Updated Supported Vehicles:
1) Supports ALL USA/EUROPEAN/JAPANESE Mitsubishi Vehicles. (Uses the fast mitsubishi dealer MUTIII protocol for datalogging)
Mitsubishi Evo 4/5/6/7/8/9, Lancer, Eclipse, FTO, Galant, VR4, Colt, Mirage, Mivec Mirage, L400, L200, 3000GT, Pajero, Shogun, Space Runner, Grandis, Carisma, SpaceStar, SpaceGear, SpaceWagon, Sigma, Diamante, Outlander, Montero, Magna, Expo, Verada, Delica, Dodge Stratus, Eclipse, Eclipse GT/GS.

OBD-I (12Pin) Supported Vehicles
EvoScan software is confirmed working with these vehicles, using a FTDI USB OBD-I 12pin cable is required. (mmcd or aldl cable with FTDI adapter works) Cables available on my website December 2007.
23) 1990-93 Mitsubishi Eclipse/DSM
24) 1990-93 Mitsubishi 3000GT/GTO
25) 1990-93 Mitsubishi Dodge Stealth
26) 1990-94 Eagle Talon, Mitsubishi Eclipse, or Plymouth Laser
27) 1991-92 Galant VR-4
28) 1993 Mitsubishi Lancer GTI 16v
29) 1989-92 Colt, Summit & Mirage (CSM)
30) 1992-95 Mitsubishi Evo I, II & III
31) 1990-1995 Mitsubishi vehicles fitted with a 12-PIN OBDI diagnostic port

UCB
11-20-2007, 03:33 PM
$10 extra for map tracing y0 :P

DoggDicker
11-20-2007, 03:34 PM
Kewl...I guess I'll have to learn about t00ning now...

* DD

earlyapex aka jack ass
11-20-2007, 03:35 PM
$10 extra for map tracing y0 :P


That's going to break the bank. ;)

UCB
11-20-2007, 03:42 PM
Thats 2 lattes and a cranberry bliss bar from starbucks :P

earlyapex aka jack ass
11-20-2007, 03:50 PM
Heh it just made me realize the car stays in almost 1 load column through WOT in 3rd on my quick crappy 91 octane tune. FPgreen at almost 22psi flat ftw.

PANGES
11-20-2007, 06:11 PM
^^^ OOOooOOoooo.... I still like my MBC though... =/

homi mike
11-20-2007, 07:05 PM
^^^ OOOooOOoooo.... I still like my MBC though... =/


Just don't forget to turn in down during cold weather ;)

smogrunner
11-20-2007, 07:30 PM
Looks good. I just got my update email.

gohdunlam
11-20-2007, 07:32 PM
i just got an email too, but i dont even use it.... =\

PANGES
11-20-2007, 11:09 PM
Hey... I never got an email update :(

chrisw
11-21-2007, 11:17 AM
me neither...

UCB
11-21-2007, 11:29 AM
I got mine. Just email them and what not

Nsin
11-21-2007, 05:01 PM
Kewl...I guess I'll have to learn about t00ning now...

DD


+1 ..Got it yesterday

steevo8
11-21-2007, 06:05 PM
I have no idea about t00ning so could someone please put into simple terms what this does?

chrisw
11-22-2007, 05:23 PM
basically, what it does is trace which timing cells in the timing map you are hitting while accelerating through the power band.

chrisw
11-22-2007, 05:34 PM
nm

XVeloX
11-24-2007, 02:13 AM
just saw this, looks good, anyone have the email address i gotta bug to get my updated version? I didnt get the email about it either. I pay a little extra with the update to get the map tracing???

chrisw
11-27-2007, 03:20 PM
yup..*

I paid for the update, but have not had time to really play around with it.* But from the simple logs that I have generated, this seems like a really cool app.*

As far as the accuracy goes, remember that the EVO actually has 3 load varables that we know about.

http://forums.evolutionm.net/showpost.php?p=4643642&postcount=14

http://forums.evolutionm.net/attachment.php?attachmentid=110210

depending on which load varable is used for the map tracing, YMMV.