PDA

View Full Version : Evo X +90whp with just an MBC and a tune?



NOTORIOUS
07-26-2008, 04:13 PM
I don't frequent the forums over on EvolutionM, but this thread caught my eye. Seems like they are tuning the ECU with a "Z" chip, not sure what that's all about. But the fact that all this power was made with oem parts aside from the Forge Unos is pretty crazy. Baseline was about 252whp on a Mustang and they made 340whp after final tune. What do you think about these TTP guys?? BS?


http://i4.photobucket.com/albums/y117/dsm95hybrid/th_TTP_No_Flash_Tuning_Movie.jpg (http://s4.photobucket.com/albums/y117/dsm95hybrid/?action=view&current=TTP_No_Flash_Tuning_Movie.flv)


http://forums.evolutionm.net/showthread.php?t=355646

08evoX
07-26-2008, 08:29 PM
I also heard that tightening the waste gate actuator gains power with a MBC. I actually did this and felt a difference, but boost hit later. Normally I felt it come alive at 3k, but after this mod it kicked in at 4k using one turn to tighten the WG actuator. I hope that my works flash helped gained more. And after the flash boost kicks in at 3300rpms now. But having a MBC would probably helped me more. So I wouldnt doubt that a MBC would gain more HP and TQ quicker and hold boost more constant. But I have no idea what that Z chip you speak of is.



But for those that have a X, this only takes 10-20 min tops. Depending how fast you get the heat sheild off.

http://bellsouthpwp.net/j/r/jrude/wastegateactuatorDIY.pdf

DirectorSe7en
07-26-2008, 10:30 PM
252whp Baseline on a Mustang dyno? Bigtime B.S. or a glory run.

04gsr
08-02-2008, 12:08 AM
that pretty high for a md. mine did 224hp 246 trq at gst. i talked to ttp and they said that this is coming from ignition timing and afr ajusting, seems like some high numbers to draw everyone in.