Page 1 of 4 123 ... LastLast
Results 1 to 10 of 40

Thread: Turbo install party this sunday. 01-11-09

  1. #1
    Join Date
    Sep 2008
    Location
    San jose
    Posts
    75

    Exclamation Turbo install party this sunday. 01-11-09

    me and noypiC50 ( Sam ) going to install our new turbo kits this sunday the 11th at my place in morgan hill
    if you wanna swing by to help us your more then welcome to.
    we ll need help 4 sure since we have 2 cars to finish.

    address is 18265 san carlos pl. morgan hill . 95037

    it is not on google since the house is new

    just go to this link and house is located right under the "A" point

    http://maps.google.com/maps?f=q&hl=e...ill&iwloc=addr



    ps. please bring your attitude w you... we need help thats the reason me posting this thread


    Thanks for reading

    Kaan
    2002 J's Racing S2000
    2002 Porsche Carrera
    2003 Conv. M3
    2005 Evo MR - Current

    GT30-76R .82a/r
    HKS 272 Cams
    ACT Xtreme Duty G6 Clutch kit
    Endess CCX brake pads
    Nesei competition IC
    3.0" downpipe ,stainless O2 housing
    38mm tial wastegate
    Full Race exhaust manifold
    Denso 720cc injectors
    Walbro 255 fuelpump
    Greddy lower IC pipe
    Greddy Type RS bov
    Enkei rc-t4 18*9.5
    Megan Track coilovers
    K&N Air fiter
    Apexi TT
    Helix Cat-back Exhaust
    Perrin Exhaust test pipe

  2. #2

    Default

    sounds good... Gotta time or do we show up at 6 in the morning? LOL
    old : 03' SVT focus
    Old : 05' EB EVO VIII
    New : 06' WW EVO IX MR
    Good day to be alive sir.
    385 WHP/355 WTQ 12/04/2008 GST Dyno
    TBE, IC Piping, intake, injectors, fuel pump, and QTP o2 dump
    Stock head/block/turbo

    E-85 Army!!!

  3. #3
    Join Date
    Mar 2005
    Posts
    7,824

    Default

    Good luck guys, shouldn't be too horrible. Just make sure you have all of the right tools handy. Got an impact wrench? razor blade? Those are the only things I can remember other than "ordinary" tools that are necessary.

    http://www.norcalevo.net/showthread....all+turbo+matz

  4. #4
    Join Date
    Jul 2006
    Location
    Travis AFB
    Posts
    181

    Default

    What kinda turbo's are ya'll installing? Here's stuff I like to have on hand for a swap:
    Beer
    music
    Chilton's/Haynes manual or on-line car manual
    oil/drain pans for oil and coolant
    anti-sieze for any exhaust mani/turbo bolt
    PB Blaster
    RTV ultra black (for oil for AN fittings on turbo/oil pan)
    electrical tape (to tape up AN lines in preperation to be cut)
    Dremel w/cut off wheel (to cut the AN lines at the proper length)
    new oil/coolant
    gloves
    shop towels
    towel to protect the cars paint from scratches etc.
    double check you have all your tools/turbo parts
    jack/jack stands/ramps
    creeper
    torque wrench
    extra stash of mitsu metric bolts
    new gaskets
    boost leak tester
    patience
    Even though it was made for your car it doesn't always act like it at first during the initial install. Good luck!, it'll be worth it.
    Last edited by Boost Demon; 01-10-2009 at 09:28 AM.

  5. #5
    Join Date
    Dec 2007
    Location
    Pleasant Hill, Ca
    Posts
    2,949

    Default

    wow nice! GL tomorrow guys! i don't have time or i would love to stop by

  6. #6

    Default

    Good luck guys.
    Don't forget to bring the socket for O2 sensor, it will save you a lot of time.
    You can pretty much re-use all gaskets except the ones for oil return line. Those are like a paper.

    What time do you guys start? I might stop by to say hi.

    '03 Evo VIII - Evo IX Turbo w/ Blox Cam, HFC, GST Magic, 380whp/353ft-lb on corn diet

  7. #7
    Join Date
    Sep 2008
    Location
    San jose
    Posts
    75

    Default

    Quote Originally Posted by Boost Demon View Post
    What kinda turbo's are ya'll installing? Here's stuff I like to have on hand for a swap:
    Beer
    music
    Chilton's/Haynes manual or on-line car manual
    oil/drain pans for oil and coolant
    anti-sieze for any exhaust mani/turbo bolt
    PB Blaster
    RTV ultra black (for oil for AN fittings on turbo/oil pan)
    electrical tape (to tape up AN lines in preperation to be cut)
    Dremel w/cut off wheel (to cut the AN lines at the proper length)
    new oil/coolant
    gloves
    shop towels
    towel to protect the cars paint from scratches etc.
    double check you have all your tools/turbo parts
    jack/jack stands/ramps
    creeper
    torque wrench
    extra stash of mitsu metric bolts
    new gaskets
    boost leak tester
    patience
    Even though it was made for your car it doesn't always act like it at first during the initial install. Good luck!, it'll be worth it.
    Thanks for the reminder
    me gt30r
    not sure about the Sam
    2002 J's Racing S2000
    2002 Porsche Carrera
    2003 Conv. M3
    2005 Evo MR - Current

    GT30-76R .82a/r
    HKS 272 Cams
    ACT Xtreme Duty G6 Clutch kit
    Endess CCX brake pads
    Nesei competition IC
    3.0" downpipe ,stainless O2 housing
    38mm tial wastegate
    Full Race exhaust manifold
    Denso 720cc injectors
    Walbro 255 fuelpump
    Greddy lower IC pipe
    Greddy Type RS bov
    Enkei rc-t4 18*9.5
    Megan Track coilovers
    K&N Air fiter
    Apexi TT
    Helix Cat-back Exhaust
    Perrin Exhaust test pipe

  8. #8
    Join Date
    Sep 2008
    Location
    San jose
    Posts
    75

    Default

    Quote Originally Posted by jessmanEVO View Post
    sounds good... Gotta time or do we show up at 6 in the morning? LOL
    something like that but you can show up anytime before we are done
    2002 J's Racing S2000
    2002 Porsche Carrera
    2003 Conv. M3
    2005 Evo MR - Current

    GT30-76R .82a/r
    HKS 272 Cams
    ACT Xtreme Duty G6 Clutch kit
    Endess CCX brake pads
    Nesei competition IC
    3.0" downpipe ,stainless O2 housing
    38mm tial wastegate
    Full Race exhaust manifold
    Denso 720cc injectors
    Walbro 255 fuelpump
    Greddy lower IC pipe
    Greddy Type RS bov
    Enkei rc-t4 18*9.5
    Megan Track coilovers
    K&N Air fiter
    Apexi TT
    Helix Cat-back Exhaust
    Perrin Exhaust test pipe

  9. #9

    Default

    gotta load up all the parts n tools tonight so I can leave early am. I'm finally swapping the 9 turbo with goodies in place of 03 turbo, should be straight forward install (crosses finger).

  10. #10
    Join Date
    Sep 2008
    Location
    San jose
    Posts
    75

    Default

    I'd like to Sam for his help today, he worked on my car as much as i worked sometime even more. Woow nice to see some nice peps in norcal evo

    pics are coming in 15 mins
    its done. 2 noob put a gt30r with a race intercooler
    now its time to get it tuned dayummmm excited
    2002 J's Racing S2000
    2002 Porsche Carrera
    2003 Conv. M3
    2005 Evo MR - Current

    GT30-76R .82a/r
    HKS 272 Cams
    ACT Xtreme Duty G6 Clutch kit
    Endess CCX brake pads
    Nesei competition IC
    3.0" downpipe ,stainless O2 housing
    38mm tial wastegate
    Full Race exhaust manifold
    Denso 720cc injectors
    Walbro 255 fuelpump
    Greddy lower IC pipe
    Greddy Type RS bov
    Enkei rc-t4 18*9.5
    Megan Track coilovers
    K&N Air fiter
    Apexi TT
    Helix Cat-back Exhaust
    Perrin Exhaust test pipe

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •